2012

5 In the Open dialog box, select a standards file to use as an override. Click
Open.
6 (Optional) Repeat steps 5 and 6 if you want to add additional standards
files as overrides.
7 In the Batch Standards Checker, click File menu ➤ Save Check File. (You
can also click Save on the Batch Standards Checker toolbar.)
To audit a set of drawings for standards violations
1 Click Manage tab ➤ CAD Standards panel ➤ Check.
2 Open an existing standards check file, or create a new one.
3 In the Batch Standards Checker, click Check menu ➤ Start Check. (You
can also click Start Check on the Batch Standards Checker toolbar.)
When the batch audit is complete, the report is displayed in a browser
window.
You can cancel the batch audit at any time by click Stop Check.
NOTE You cannot check encrypted files using the Batch Standards Checker.
To add notes to the batch audit report
1 Click Manage tab ➤ CAD Standards panel ➤ Check.
2 Create a standards check file or open an existing one.
3 In the Batch Standards Checker, Notes tab, enter notes to be included in
the report.
4 Click File menu ➤ Save Check File. (You can also click Save on the Batch
Standards Checker toolbar.)
To view a previously generated batch audit report
1 Click Manage tab ➤ CAD Standards panel ➤ Check.
268 | Chapter 9 Maintain Standards in Drawings