2012

NOTE If you select Display Alert upon Standards Violation in the Check Standards
dialog box and you fix a violation, you can return to a fixing operation where you
left off. If you select Display Standards Status Bar icon and you click the icon and
fix a violation, you must return to a standards-fixing operation from the beginning.
To audit a drawing for standards violations
1 Open a drawing that has one or more associated standards files.
An Associated Standards File(s) icon is displayed in the status bar. If an
associated standards file is missing, a Missing Standards File(s) icon is
displayed in the status bar.
NOTE If you click the Missing Standards File(s) icon and then resolve or
dissociate missing standards files, the Missing Standards File(s) icon is replaced
by the Associated Standards File(s) icon.
2 In the drawing with one or more associated standards files, click Manage
tab ➤ CAD Standards panel ➤ Check.
The Check Standards dialog box is displayed with the first standards
violation reported under Problem.
3 Do one of the following:
■ If you want to apply the item selected in the Replace With list to fix
the violation reported under Problem, click Fix. If there is a
recommended fix in the Replace With list, it is preceded by a check
mark. If no recommended fix exists for the current standards violation,
the Fix button is not available.
The Check Standards dialog box automatically displays the next
standards violation under Problem.
■ Manually fix the standards violation. Click the Next button to display
the next violation.
■ Select Mark This Problem as Ignored. Click the Next button to display
the next violation.
Selecting Mark This Problem as Ignored flags the standards violation
so you can prevent it from being displayed the next time you use the
CHECKSTANDARDS command.
■ Click the Next button to display the next violation.
Check Drawings for Standards Violations | 265