2012

7 Under Transmittal File Folder, click Browse to specify the folder where
the transmittal package should be created. A standard file selection dialog
box is displayed.
8 Locate the folder where you want to create the transmittal package. Click
Open.
9 Click OK to close the Modify Transmittal Setup dialog box.
10 Click Close to close the Transmittal Setups dialog box.
11 (Optional) In the Create Transmittal dialog box, in the area for notes,
specify any additional comments to include with the report file.
12 Click OK to create the transmittal package in the folder you specified.
To create a transmittal package from a sheet set
1 Open the sheet set that you want to transmit.
2 In the Sheet Set Manager, Sheet List tab, right-click one of the following
types of nodes from the Sheets-Tree list:
■ Sheet set (top-level node). To transmit an entire sheet set.
■ Sheet subset (lower-level node). To transmit a sheet subset or selected
portion of a sheet set.
■ Sheet (lowest level node). To transmit a selected sheet or a selected
portion of a sheet set.
3 On the shortcut menu, click ETransmit.
In the Create Transmittal dialog box, on the Sheets tab, sheets are shown
indented underneath another sheet when the indented sheets belong to
the same drawing file. Selecting or clearing a sheet automatically selects
or clears any indented sheets because transmitting a sheet transmits the
entire drawing.
NOTE It is recommended that you create and save several transmittal setups.
Then, when you need to create a transmittal package, you can select a
transmittal setup rather than following steps 4-11.
4 In the Create Transmittal dialog box, click Transmittal Setups. Click
Modify.
5 In the Modify Transmittal Setup dialog box, click the arrow to display
the list under Transmittal Package Type, and select the type of transmittal
Package a Set of Files for Internet Transmission | 2117