2012

Table Of Contents
To use the DWFADJUST command to adjust the fade, contrast, and
monochrome settings of a DWF underlay
1 Click Insert tab Reference panel Adjust.
2 Select the DWF underlay to adjust.
3 On the Enter DWF Underlay Options menu, select one of the following:
Select Fade and enter a fade value.
Select Contrast and enter a contrast value.
Select Monochrome and set monochrome to Yes or No.
The appearance of the DWF underlay is updated after you enter the new value
and the command is completed.
To use the PDFADJUST command to adjust the fade, contrast, and
monochrome settings of a PDF underlay
1 Click Insert tab Reference panel Adjust.
2 Select the PDF underlay to adjust.
3 On the Enter PDF Underlay Options menu, select one of the following:
Select Fade and enter a fade value.
Select Contrast and enter a contrast value.
Select Monochrome and set monochrome to Yes or No.
The appearance of the PDF underlay is updated after you enter the new value
and the command is completed.
To use the DGNADJUST command to adjust the fade, contrast, and
monochrome settings of a DGN underlay
1 Click Insert tab Reference panel Adjust.
2 Select the DGN underlay to adjust.
1902 | Chapter 37 Work with Data in Other Formats