2012

Table Of Contents
3 Under Found At, do one of the following:
Edit the xref path directly.
Click within the edit box, and then click the Browse button (...) that
appears. Select the xref in its new path.
4 Click OK.
The program reloads the xref and then regenerates the drawing with the
xref in place.
To display the currently defined project names
1 Click Tools menu Options.
2 In the Options dialog box, Files tab, double-click Project Files Search Path.
3 Click each project name folder to display the search paths associated with
it.
4 Click OK (or Apply).
To add a project name
1 Click Tools menu Options.
2 In the Options dialog box, Files tab, double-click Project Files Search Path.
Click Add.
A folder named projectx (where x indicates the next available number) is
created and indented beneath the project folder.
3 Either enter a new name, or press Enter to accept projectx.
The project name must be 31 characters or fewer, and it cannot contain
leading spaces or terminating spaces.
4 Click OK (or Apply).
To remove a project name
1 Click Tools menu Options.
2 In the Options dialog box, Files tab, double-click Project Files Search Path.
3 Select a project name. Click Remove.
4 Click OK (or Apply).
Set Paths to Referenced Drawings | 1785