2012

5 Click Publish Options. In General DWF Options, set the DWF Type to
Multi-sheet DWF.
6 Select the Publish Output options.
NOTE The Precision Override setting does not affect models sheets that are
converted to 3D DWF.
7 In 3D DWF options group, click Yes to publish materials. Click OK.
8 Click Publish.
To publish multiple 3D or combined 2D and 3D DWFx files
1 Click Output tab ➤ Plot panel ➤ Batch Plot.
2 In the Publish dialog box, under Sheets to Publish, select the sheets you
want to publish and set their Page Setup / 3D DWF setting to 3D DWF.
The sheets that are displayed in the Sheets to Publish group are controlled
by the PUBLISHALLSHEETS system variable.
NOTE The Status of the selected sheet will show, “3D DWF cannot be
published to a “Plotter Named in Paget Setup”, until you change the Publish
to option to DWF Format.
3 In Publish To group, click to select DWF Format.
4 Select DWFx File from the drop-down list.
5 Click Publish Options. In General DWF Options, set the DWF Type to
Multi-sheet DWF.
6 Select the Publish Output options.
NOTE The Precision Override setting does not affect models sheets that are
converted to 3D DWF.
7 In 3D DWF options group, click Yes to publish materials. Click OK.
8 Click Publish.
1764 | Chapter 34 Publish Drawings