2012

You can also create annotative on page 2289 tolerances. For more information
about creating and working with an annotative tolerances, see
Create
Annotative Dimensions and Tolerances
on page 1339.
See also:
■
Scale Annotations on page 1324
■ Create Annotative Dimensions and Tolerances on page 1339
To create geometric tolerances
1 Click Annotate tab ➤ Dimensions panel ➤ Tolerance.
2 In the Geometric Tolerance dialog box, click the first square under Sym
and select a symbol to insert.
3 Under Tolerance 1, click the first black box to insert a diameter symbol.
4 In the Text box, enter the first tolerance value.
5 To add a material condition (optional), click the second black box and
click a symbol in the Material Conditions dialog box to insert it.
6 In the Geometric Tolerance dialog box, add a second tolerance value
(optional) in the same way as the first tolerance value.
7 Under Datum 1, Datum 2, Datum 3, enter the datum reference letter.
8 Click the black box to insert a material condition symbol for each datum
reference.
9 In the Height box, enter a height.
10 Click the Projected Tolerance Zone box to insert the symbol.
11 In the Datum Identifier box, add a datum value.
12 Click OK.
13 In the drawing, specify a location for the feature control frame.
To create a geometric tolerance with a leader
1 At the Command prompt, enter leader.
2 Specify the start point of the leader.
1622 | Chapter 31 Dimensions and Tolerances