2012

Table Of Contents
5 In the Hatch and Gradient dialog box, make adjustments, if necessary.
To access additional options, click the More Options button at the
bottom-right of the dialog box.
6 (Optional) From the Draw Order drop-down list, choose one of the
options.
You can change the draw order of the hatch so that the hatch is displayed
either behind or in front of the hatch boundary, or behind or in front of
all other objects.
7 Click OK to apply the hatch.
To hatch selected objects (ribbon turned on)
1 Click Home tab Draw panel Hatch.
2 On the Boundaries panel, click Select.
3 Select the objects that you want to hatch.
4 Press Enter, or click Close on the ribbon to apply the hatch and exit the
command.
To hatch selected objects (ribbon turned off)
1 Start the Hatch command from a menu or toolbar.
2 In the Hatch and Gradient dialog box, under Boundaries, click Add: Select
Objects.
3 Select the objects that you want to hatch and press Enter.
4 Click OK to apply the hatch.
Quick Reference
Commands
ADCENTER
Manages and inserts content such as blocks, xrefs, and hatch patterns.
Overview of Hatch Patterns and Fills | 1363