2012

Annotative on page 2289 block definitions create annotative block references.
Annotative block references and attributes initially support the current
annotation scale at the time they are inserted. You should insert annotative
block references with a unit factor of 1.
You cannot change the Annotative property of individual block references.
To set an annotative block’s paper size, you should define the block in paper
space or on the Model layout with the
annotation scale on page 2289 set to 1:1.
When creating and working with annotative blocks and annotative objects
within blocks, the following points should be noted:
■ Non-annotative blocks can contain annotative objects, which are scaled
by the block’s scale factor in addition to the annotation scale.
■ Annotative blocks cannot reside in annotative blocks.
■ Annotative block references are scaled uniformly by the current annotation
scale as well as any user scale applied to the block reference.
■ Blocks that contain annotative objects should not be manually scaled.
You can define annotative attributes for annotative and non-annotative blocks.
Use annotative attributes with non-annotative blocks when you want the
geometry in the block to display on the paper based on the scale of the
viewport, but you want the attribute text to display at the Paper Text Height
defined for the attribute.
Create Annotative Objects | 1347