2012

Table Of Contents
3 Click one or more mesh faces and press Enter.
4 Specify the amount of extrusion using one of the following methods:
(Single face extrusion only) Press Enter to set the extrusion
dynamically.
Enter a value to indicate the height or depth of the extrusion and
press Enter.
The selected face is extruded.
To merge mesh faces
1 Click Mesh tab Mesh Edit panel Merge Face.
2 On a mesh object, select two or more mesh faces and press Enter.
The selected faces are combined to form a single face.
To collapse mesh faces
1 Click Mesh tab Mesh Edit panel Mesh Edit drop-down Collapse
Face or Edge.
2 Select a mesh face or edge.
NOTE If you cannot select a face or edge, verify whether subobject selection
filtering is turned on for a different subobject type. (Right-click the drawing
area and click Subobject Selection Filter.)
The vertices of the face or edge that you selected are collapsed to a single
point.
To spin the shared edge of triangular mesh faces
1 Click Mesh Modeling tab Mesh Edit panel Mesh Edit drop-down
Spin Triangle Face.
2 Select two triangular mesh faces that are adjacent to one another.
Modify Mesh Faces | 1257