2012

try assigning a material that has the same ambient and diffuse color. For more
information see
Create New Materials on page 2209.
See also:
■
Work with Complex 3D Solids and Surfaces on page 1202
To modify the contour of a lofted solid or surface by changing the surface
normal settings (Properties palette)
1 In a drawing, select a lofted solid or surface that was created with cross
sections.
2 If the Properties palette is not displayed, select any object. Right-click the
object to display the shortcut menu. Click Properties.
3 On the Properties palette, Geometry area, change the Surface Normals
setting. (For a description, see Loft Settings.)
To modify a mesh object in the Properties palette
1 If the Properties palette is not displayed, select any object. Right-click the
object to display the shortcut menu. Click Properties.
2 Click the mesh object to select it.
3 In the Properties palette, modify the properties you want to change.
To modify a mesh face, edge, or vertex in the Properties palette
1 If the Properties palette is not displayed, select any object. Right-click the
object to display the shortcut menu. Click Properties.
2 Press Ctrl+click the mesh face, edge, or vertex that you want to modify.
NOTE If you cannot select a specific subobject, verify whether subobject
selection filtering is turned on for a different subobject type. (Right-click in
the drawing area and click Subobject Selection Filter.)
3 In the Properties palette, modify the properties you want to change.
Modify the Properties of 3D Solids, Surfaces, and Meshes | 1217