2012

6 To complete the chamfer, press Enter.
To modify a fillet or chamfer on a 3D solid
1 Press and hold Ctrl as you select a fillet or chamfer on a 3D solid.
2 If the Properties palette is not displayed, select any object. Right-click the
object to display the shortcut menu. Click Properties.
3 In the Properties palette, modify the properties of the fillet or chamfer.
To change the color of an edge on a solid object
1 Press and hold Ctrl as you click an edge on a 3D solid.
2 If the Properties palette is not displayed, select any object. Right-click the
object to display the shortcut menu. Click Properties.
3 In the Properties palette, under General, click the Color arrow and select
a color from the list
For additional color options, click Select Color to display the Select Color
dialog box. Specify a color and click OK.
To copy an edge on a solid object
1 Click Home tab ➤ Solid Editing panel ➤ Edge Editing drop-down ➤ Copy
Edges.
2 Press Ctrl+click the edge of the face to copy.
3 Select additional edges, if needed, and press Enter.
4 Specify the base point of the copied edges.
5 Specify the second point of displacement to indicate the location of the
copied edges.
6 Press Enter to complete the command.
1198 | Chapter 25 Modify 3D Models