2012

Table Of Contents
Use Gizmos to Modify Objects on page 1161
Modify Objects on page 775
Move or Rotate Objects on page 787
Resize or Reshape Objects on page 828
Overview of Modifying Meshes on page 1238
To fillet a solid object
1 Click Solid tab Solid Editing panel Fillet Edge.
2 Select the edge of the solid to fillet.
3 Specify the fillet radius.
4 Select additional edges or press Enter to fillet.
To chamfer a 3D solid object
1 Click Solid tab Solid Editing panel Chamfer Edge.
2 Select the edge of the base surface to chamfer.
One of two surfaces adjacent to the selected edge is highlighted.
3 Do one of the following:
To select a different surface, enter n (Next).
To use the current surface, press Enter.
4 Specify the base surface distance.
The base surface distance is measured from the selected edge to a point
on the base surface. The other surface distance is measured from the
selected edge to a point on the adjacent surface.
5 Specify the location of the chamfer using one of the following options.
To specify an individual edge, select the edge.
To select all edges around the base surface, enter l (Loop). Specify an
edge.
Modify Edges on 3D Objects | 1197