2012

Table Of Contents
Delete a Face
If you specify two points, the first point is used as a base point and a single
copy is placed relative to the base point. If you specify a single point and press
Enter, the original selection point is used as a base point. The next point is
the point of displacement.
If a face is surrounded by coplanar faces, you can delete it using the following
methods:
Select the face and press Delete.
Select the face and enter erase.
Use the Delete option of the SOLIDEDIT command.
Color a Faces
You can modify the color of a face on a 3D solid by selecting the face and
then changing the Color property in the Properties palette.
See also:
Modify Mesh Faces on page 1253
To copy a face on a solid object
1 Click Home tab Solid Editing panel Face Editing drop-down Copy
Faces.
2 Select the face to copy.
3 Select additional faces or press Enter to copy.
4 Specify the base point for the copy.
5 Specify the second point of displacement and press Enter.
1192 | Chapter 25 Modify 3D Models