2012

3 Enter .xy and then enter @ at the Of prompt.
This operation extracts the X and Y coordinate values from the first point.
4 Enter 0 to specify the Z value.
The X and Y values extracted from the first point are combined with a
new Z value (0) to finish the definition of the second point.
5 Press Enter to end the command.
To create wireframe geometry by extracting edges
1 Click Home tab ➤ Solid Editing panel ➤ Extract Edges.
2 Select one or more of the following objects:
■ 3D solids
■ Surfaces
■ Meshes
■ Regions
■ Edges (on 3D solids, surfaces, or meshes)
■ Faces (on 3D solids or meshes)
3 Press Enter.
Objects such as lines, arcs, splines, or 3D polylines are created along the
edges of the selected objects or subobjects.
Quick Reference
Commands
UCS
Sets the origin and orientation of the current UCS.
XEDGES
Creates wireframe geometry from the edges of a 3D solid, surface, mesh,
region, or subobject.
Create Wireframe Models | 1155