2012

SUBOBJSELECTIONMODE
Filters whether faces, edges, vertices or solid history subobjects are highlighted
when you roll over them.
SURFACEASSOCIATIVITY
Controls whether surfaces maintain a relationship with the objects from
which they were created.
Create Network Surfaces
Create non-planar surfaces in the space between edge subobjects, splines and
other 2D and 3D curves.
Create non-planar, network surfaces with the SURFNETWORK command.
Network surfaces are similar to lofted surfaces in that they are created in the
space between several curves in the U and V directions. The curves can be
surface or solid edge subobjects. When you create the surface you can specify
the tangency and bulge magnitude of the surface edges.
See also:
■
Overview of Creating Surfaces on page 1080
To create a network surface
1 Click Surface tab ➤ Create panel ➤ Network.
2 In the drawing area, select cross section curves in the first direction (U
or V) and press Enter.
3 Select cross sections in the second direction and press Enter.
Quick Reference
Commands
3DOSNAP
Sets the object snap modes for 3D objects.
1088 | Chapter 24 Create 3D Models