2012

5 Press Enter.
To create a polysolid from an existing object
1 Click Home tab ➤ Modeling panel ➤ Polysolid.
2 At the Command prompt, enter o (Object).
3 Select a 2D object such as a line, polyline, arc, or circle.
A 3D polysolid is created using the current height and width settings.
The original 2D object is deleted or retained, depending on the setting
of the DELOBJ system variable.
Quick Reference
Commands
POLYSOLID
Creates a 3D wall-like polysolid.
System Variables
DELOBJ
Controls whether geometry used to create other objects is retained or deleted.
PSOLHEIGHT
Controls the default height for a swept solid object created with the
POLYSOLID command.
PSOLWIDTH
Controls the default width for a swept solid object created with the
POLYSOLID command.
Create 3D Solids from Objects
Convert existing objects to 3D solids.
You can use several methods to convert objects in your drawing to 3D solids:
■ Convert surfaces and objects with Thickness to 3D Solids
■ Convert a group of surfaces to a 3D solid
1068 | Chapter 24 Create 3D Models