2012

Polysolid Creation Options
Use the following options to control the size and shape of the polysolids you
create:
■ Create arced segments. Use the Arc option to add curved segments to the
polysolid. The profile of a polysolid with curved segments remains
perpendicular to the path.
■ Create a polysolid from a 2D object. Use the Object option to convert an
object such as a polyline, circle, line, or arc to a polysolid. The DELOBJ
system variable controls whether the path (a 2D object) is automatically
deleted when you create a polysolid.
■ Close the gap between the first and last points. Use the Close option to
create a connecting segment.
■ Set the height and width. Use the Height and Width options for the
POLYSOLID command. The values you set are stored in the PSOLWIDTH
and PSOLHEIGHT system variables.
■ Set where the object is drawn in relation to the specified points. Use the
Justification option to place the path of the polysolid to the right, to the
left, or down the center of the points you specify.
To draw a polysolid
1 Click Home tab ➤ Modeling panel ➤ Polysolid.
2 Specify a start point.
3 Specify the next point.
To create a curved segment, at the Command prompt, enter a (Arc) and
specify the next point.
4 Repeat step 3 to complete the desired solid.
Create a Polysolid | 1067