2012

■ Draw Splines on page 723
■ Modify Splines on page 853
To create a solid by sweeping an object along a path
1 Click Solid tab ➤ Create panel ➤ Sweep.
2 Select objects to sweep.
3 Press Enter.
4 Select an object or edge subobject as a sweep path.
After the sweep, the original objects are deleted or retained, depending
on the setting of the DELOBJ system variable.
To create a surface by sweeping an object along a path
1 Click Surface tab ➤ Create panel ➤ Sweep.
2 Select objects to sweep.
3 Press Enter.
4 Select an object or edge subobject as a sweep path.
After the sweep, the original objects are deleted or retained, depending
on the setting of the DELOBJ system variable.
Quick Reference
Commands
3DOSNAP
Sets the object snap modes for 3D objects.
BREP
Removes the history from 3D solids and composite solids, and associativity
from surfaces.
1040 | Chapter 24 Create 3D Models