2012

To extrude a NURBS surface
1 Click Surface tab ➤ Create panel ➤ NURBS Creation.
2 Click Home tab ➤ Surface panel ➤ Extrude.
3 Select the objects or edge subobjects to extrude.
4 Specify the height.
After the extrusion, the original objects are deleted or retained, depending
on the setting of the DELOBJ system variable.
To extrude a solid
1 Click Solid tab ➤ Create panel ➤ Extrude.
2 Select the objects or edge subobjects to extrude.
3 Specify the height.
After the extrusion, the original objects are deleted or retained, depending
on the setting of the DELOBJ system variable.
To extrude a procedural surface along a path
1 Click Surface tab ➤ Create panel ➤ Extrude.
2 Select the objects or edge subobjects to extrude.
3 At the Command prompt, enter p (Path).
4 Select the object or edge subobject to use as the path.
After the extrusion, the original objects are deleted or retained, depending
on the setting of the DELOBJ system variable.
1036 | Chapter 24 Create 3D Models