2012

Table Of Contents
7 (Optional) If you are finished using the Block Editor, click Close Block
Editor.
To specify that dynamic block reference can be exploded
1 Open a block definition in the Block Editor
2 In the Block Editor, make sure nothing is selected.
3 In the Properties palette, under Block, click Allow Exploding.
4 On the drop-down list, select Yes or No.
5 Click Block Editor tab Open/Save panel Save Block.
6 (Optional) If you are finished using the Block Editor, click Close Block
Editor.
To prevent non-uniform scaling in dynamic block reference
1 Open a block definition in the Block Editor
2 In the Block Editor, make sure nothing is selected.
3 In the Properties palette, under Block, click Scale Uniformly.
4 On the drop-down list, select Yes.
5 Click Block Editor tab Open/Save panel Save Block.
6 (Optional) If you are finished using the Block Editor, click Close Block
Editor.
Quick Reference
BEDIT
Opens the block definition in the Block Editor.
BPARAMETER
Adds a parameter with grips to a dynamic block definition.
Specify Properties for Dynamic Blocks | 1007