2012

You can toggle the behavior of a coordinate value from the Action tree on the
Action Recorder. You can also change all coordinate values in an action macro
to be relative or absolute from the top node in the Action tree.
To toggle a coordinate value to be absolute or relative to the previous point
1 On the ribbon, click Manage tab ➤ Action Recorder panel. Click the
down arrow next to the Action Macro list.
2 In the Action Macro list, select the action macro that contains the
coordinate value node you want to modify.
3 Expand the Action Recorder panel.
4 In the Action tree, right-click the coordinate value node and click Relative
to Previous.
■ To make a coordinate value absolute, click Relative to Previous if a
check mark is present before it. If no check mark is present, then the
coordinate value is already absolute.
■ To make a coordinate value relative to the previous point, click Relative
to Previous if a check mark is not present before it. If a check mark is
present, then the coordinate value is already relative to the previous
point.
To toggle all coordinate values to be absolute or relative to the previous
point
1 On the ribbon, click Manage tab ➤ Action Recorder panel. Click the
down arrow next to the Action Macro list.
2 In the Action Macro list, select the action macro that contains the
coordinate value node that you want to be absolute or relative to the
previous coordinate.
3 Expand the Action Recorder panel.
4 In the Action tree, right-click the top node and click All Points Are
Relative.
■ To make all coordinate values absolute, click All Points Are Relative
if a check mark is present before it. If no check mark is present, then
the coordinate values might already be absolute; there might also be
a combination of absolute and relative coordinate values in the macro.
Manage and Modify Action Macros | 45