2012

Elevation
Sets the relative height along the specified up-direction defined for a geographic
location.
North Direction
By default, north is the positive Y direction in the World Coordinate System
(WCS).
Angle
Specifies the angle from 0 for the north direction
Pick Point
Specifies the north angle based on the direction vector specified. A rubber
band line appears denoting the north direction.
Interactive North Direction Preview
Specifies the north angle. The range is 0-359.9.
Up Direction
By default, the up direction is the positive Z-axis (0,0,+1). The Up direction
and the north direction are always constrained such that they are perpendicular
to each other.
Up Direction
Sets the up direction.
Pick Point
Specifies the up direction (from the current WCS coordinate) based on the
direction vector specified.
Enabled only if the up direction is set to Custom.
Location Picker Dialog Box
Quick Reference
See also:
■ Specify the Geographic Location of a Drawing
Sets the latitude and longitude of the selected location.
Location Picker Dialog Box | 855