2012

When an arc is part of a tapered extrusion, the angle of the arc remains
constant, and the radius of the arc changes.
■ Angle of taper. Specifies the taper between -90 and +90 degrees.
■ Specify two points. Specifies the taper angle based on two specified points.
The taper angle is the distance between the two specified points.
Drag the cursor horizontally to specify and preview the taper angle. You can
also drag the cursor to adjust and preview the height of the extrusion. The
dynamic input origin should be placed on the extruded shape, on the
projection of the point to the shape.
When you select the extruded object, the position of the taper grip is the
correspondent point of the dynamic input origin on the top face of the
extrusion.
Expression Enter a formula or equation to specify the extrusion height. See
Constrain a Design with Formulas and Equations.
798 | Chapter 6 E Commands