2012

List of Options
The following options are displayed.
Save Log As
Displays a
standard file selection dialog box.
-3DCONFIG
Quick Reference
See also:
■ Control Performance
Controls 3D display performance in the command line.
List of Prompts
The following prompts are displayed.
Enter option: [Adaptive degradation/Dynamic tessellation/General
options
/acceLeration/Plot emulation/eXit] <Adaptive degradation>:
Adaptive Degradation
Turns off or minimizes display effects when performance drops below the
minimum you specify.
Dynamic Tessellation
Sets the options that determine the smoothness of the objects in a drawing.
Objects are drawn using many short lines (or triangles when drawing spheres).
These lines are called tessellation lines. Objects in your drawing appear smoother
when you use more tessellation lines.
Surface Tessellation Determines the amount of detail for surfaces in your
drawing. A higher setting provides more detail but uses more tessellation lines
and more memory.
Curve Tessellation Determines the amount of detail for curves in your
drawing. A higher setting provides more detail but uses more tessellation lines
and more memory.
Number of Tessellations to Cache Configures your system according to
memory and performance requirements. The 3D cache always stores at least
one tessellation. When this option is set to 1, the tessellation for all viewports
is the same; some objects in the drawing may be regenerated as you zoom in
-3DCONFIG | 25