2012

Contrast
Controls the contrast, and indirectly, the fading effect, of the underlay. Values
range from 0 through 100. The greater the value, the more each pixel is forced
to its primary or secondary color.
Monochrome
Controls the color saturation of all linework while maintaining the luminance.
When turned on, the linework appears in varying shades of gray starting at
black if the background color luminance is 50 percent or more. If the
background color luminance is less than 50 percent, then the colors are
inverted, with the darkest linework displaying in white, and the lightest
linework displaying in black.
DWFATTACH
Quick Reference
See also:
■ Attach Files as Underlays
Insert a DWF or DWFx file as an underlay into the current drawing.
Access Methods
Button
Ribbon: Insert tab ➤ Reference panel ➤ Attach
Menu: Insert ➤ DWF Underlay
Toolbar: Insert
Summary
The Select DWF File dialog box (a
standard file selection dialog box) is
displayed. Once you select a DWF or DWFx file, the
Attach DWF Underlay
dialog box
is displayed. After the file is attached, you can adjust and clip the
underlay through the
DWF Underlay Ribbon Contextual Tab on page 707.
DWFATTACH | 703