2012

DWFADJUST
Quick Reference
See also:
■ Adjust Underlay Contrast, Fade, Monochrome, and Colors for the
Background
Adjust the fade, contrast, and monochrome settings of a DWF or DWFx
underlay.
Access Methods
Button
Ribbon: DWF Underlay contextual tab ➤ Adjust panel
Summary
You can change the default values for Fade, Contrast, and Monochrome for
a single or multiple DWF and DWFx underlays. To confirm the settings on a
selected DWF or DWFx underlay, use the Properties palette.
NOTE You can also use the ADJUST on page 102 command to change the fade,
contrast, and monochrome settings for DWF underlays as well as DWF, DWFx and
PDF underlays or the fade, contrast and brightness for images.
To adjust colors in the DWF or DWFx underlay, open the Properties palette
for the DWF or DWFx underlay. For more information, see Adjust Underlay
Contrast, Fade, Monochrome, and Colors for the Background.
List of Prompts
The following prompts are displayed.
Fade
Controls the fade effect of the underlay. Values range from 0 through 100.
The greater the value, the lighter the linework in the underlay appears. Works
indirectly with the contrast effect; a higher contrast value blends the underlay
into the background when fade is set to a higher value.
702 | Chapter 5 D Commands