2012

Sets clipping planes for the display in 3D Orbit view.
Summary
Use the Adjust Clipping Planes toolbar, or right-click in the Adjust Clipping
Planes window and select an option from the shortcut menu.
Click the Close button in the upper-right corner of the window to see the
effect of the clipping planes. As you rotate the view, different portions of the
objects are clipped as they pass in and out of the clipping planes.
To turn clipping planes off, right-click in the drawing area or the Adjust
Clipping Planes window, and check or clear Front Clipping On and Back
Clipping On.
Adjust Clipping Planes Shortcut Menu
To choose any of the following options, right-click in the Adjust Clipping
Planes window.
Adjust Front Clipping Adjusts only the front clipping plane. The line near
the bottom of the window adjusts the front clipping plane. If a check mark
is displayed next to Front Clipping On, you can see the clipping in the 3D
Orbit view as you move the line up or down.
Adjust Back Clipping Adjusts only the back clipping plane. The line near the
top of the window adjusts the back clipping plane. If a check mark is displayed
next to Back Clipping On, you can see the clipping in the 3D Orbit view as
you move the line up or down.
20 | Chapter 1 3D Commands