2012

Attach DGN Underlay Dialog Box
Quick Reference
See also:
■ Attach Files as Underlays
Names, locates, and defines the insertion point, scale, and rotation when
attaching DGN underlays.
List of Options
The following options are displayed.
Name
Identifies the DGN file you have selected to attach.
Browse
Opens the Select Reference File dialog (a standard file selection dialog box on
page 1311).
Select a design model from the DGN file
Displays all of the design models that are found in the DGN file. If the DGN
file only contains a single design model, that model is listed.
If the DGN file contains multiple design models, only a single model can be
selected for attachment. The first model in the list is selected by default.
Conversion Units
Matches the DWF files’s drawing units to the master units and sub-units
specified in the DGN file. For example, if the DGN file has master units set to
meters, and sub-units set to millimeters, and you want the DWG to be set to
millimeters, select sub-units in the Attach DGN Underlay dialog box.
Master Units Matches the DWG drawing units to the master units set in the
DGN file.
Sub Units Matches the DWG drawing units to the sub- units set in the DGN
file.
Path Type
Selects the full (absolute) path, the relative path to the DGN file, or No Path,
the name of the DGN file (the DGN file must be located in the same folder as
the current drawing file).
534 | Chapter 5 D Commands