2012

Specify the reference angle <0>: Specify a point, enter an angle, or press Enter
You can define a reference angle by specifying two points or an angle from
the X axis on the XY plane. For example, you can rotate the box to align two
specified points on the box with a point on another object. After defining a
reference angle, specify a point for the reference angle to align with. The box
then rotates around the first corner relative to the angle of rotation specified
for the reference angle.
If you enter 0 as a reference angle, the new angle alone determines the rotation
of the box.
Specify the new angle: Specify a point or enter an angle
To specify the new angle of rotation, specify a point relative to the base point.
The base point for the rotation is the first corner of the box. The box rotates
the angular distance between the reference angle and the new angle. If you
want to align the box with another object, specify two points on the target
object to define the new angle of rotation for the box.
If the reference angle of rotation is 0, the box rotates the angular distance
entered relative to the first corner point of the box.
Cone
Creates a cone-shaped polygon mesh.
Specify center point for base of cone: Specify a point (1)
Specify radius for base of cone or [Diameter]: Specify a distance or enter d
Radius for Base
Defines the base of the cone by its radius.
Specify radius for top of cone or [Diameter] <0>: Specify a distance, enter d, or
press Enter
6 | Chapter 1 3D Commands