2012

Axis Endpoint Specifies the endpoint location for the cylinder axis. This
endpoint is the center point of the top face of the cylinder. The axis endpoint
can be located anywhere in 3D space. The axis endpoint defines the length
and orientation of the cylinder.
2P (Two Points)
Defines the base diameter of the cylinder by specifying two points.
■ 2Point
■ Axis endpoint
TTR (Tangent, Tangent, Radius)
Defines the base of the cylinder with a specified radius tangent to two objects.
Sometimes more than one base matches the specified criteria. The program
draws the base of the specified radius whose tangent points are closest to the
selected points.
■ 2Point
■ Axis endpoint
Elliptical
Specifies an elliptical base for the cylinder.
Center Creates the base of the cylinder by using a specified center point.
■ 2Point
■ Axis endpoint
Diameter
Specifies the diameter for the base of the cylinder.
CYLINDER | 419