2012

nearest distance between them is within the distance tolerance specified, then
the constraint will be applied even if the check boxed are selected.
Autoconstrain Headings
■ Priority — Controls the order in which constraints are applied.
■ Constraint Type — Controls the type of constraint applied to objects.
■ Apply — Controls the constraints that are applied when applying
constraints to multiple objects.
Move Up Changes the order of the selected item by moving it up in the list.
Move Down Changes the order of the selected item by moving it down in
the list.
Select All Selects all geometric constraint types to autoconstrain.
Clear All Clears all geometric constraint types to autoconstrain.
Reset Resets AutoConstrain settings to default values.
Tangent Objects Must Share an Intersection Point Specifies that two curves
must share a common point (as specified within the distance tolerance) for
the tangent constraint to be applied.
Perpendicular Objects Must Share an Intersection Point Specifies that lines
must intersect or the endpoint of one line must be coincident with the other
line or endpoint of the line as specified within the distance tolerance.
Tolerances Sets the acceptable tolerance values to determine whether a
constraint can be applied.
■ Distance — Distance tolerance are applied to coincident, concentric,
tangent, and collinear constraints.
■ Angle — Angular tolerance are applied to horizontal, vertical, parallel,
perpendicular, tangent, and collinear constraints.
+CONSTRAINTSETTINGS
Quick Reference
See also:
■ Overview of Constraints
+CONSTRAINTSETTINGS | 363