2012

Specify Endpoint Determines the distance and angle from the base point.
The distance and angle are custom properties in the Properties palette.
Specify Label Location Specify Label Location on page 273
Enter Number of Grips
Enter Number of Grips on page 273
XY
Button
Block Editor contextual tab ➤ Action Parameters panel ➤ Action Parameters
drop-down ➤ XY
Defines an X and Y distance from the base point of a block definition.
Specify Base Point Determines the maximum X distance for the parameter.
Name Name on page 271
Label
Label on page 271
Chain
Chain on page 272
Description
Description on page 272
Palette
Palette on page 272
Value Set
Value Set on page 273
Specify Endpoint Determines the maximum Y distance for the parameter.
Specify Number of Grips Determines the number of grips that will display
in the block reference.
■
0. on page 273
■ 1. A grip will be displayed at the endpoint of the Y distance.
■ 2. A grip will be displayed at both endpoints.
■ 4. Grips will be displayed at all four corners of the parameter.
Rotation
Button
274 | Chapter 3 B Commands