2012

Chain Determines whether the parameter is included in the selection set of
an action that is associated with a different parameter.
■ Yes. A change to an action associated with this parameter will also trigger
other actions associated with this parameter, just as if you had edited the
parameter through a grip or custom property.
■ No. Associated actions are not triggered.
Description Defines an extended description of the
Label on page 271 custom
property. When the block reference is inserted, this description is displayed
at the bottom of the Properties palette.
Palette Specifies whether the Label custom property is displayed in the
Properties palette when the block reference is selected in a drawing.
Linear
Button
Block Editor contextual tab ➤ Action Parameters panel ➤ Action Parameters
drop-down ➤ Linear
Defines the distance between two key points in the block definition.
Specify Start Point/Endpoint Specifies the key points for the parameter in
the block definition.
Name
Name on page 271
Label
Label on page 271
Chain
Chain on page 272
Description
Description on page 272
Base Specifies the Base Location property for the parameter.
■ Startpoint. The start point of the parameter remains fixed when the
endpoint of the parameter is edited in the block reference.
■ Midpoint. The midpoint of the parameter remains fixed, and the start
point and endpoint of the parameter move simultaneously equal distances
from the midpoint.
Palette Palette on page 272
272 | Chapter 3 B Commands