2012

Fix Constraint (GCFIX on page 840) Locks points and curves in position.
Constraint Parameters
Aligned Constraint (
BCPARAMETER on page 224) Constrains the length of
a line or the distance between two lines, a point on an object and a line, or
two points on different objects.
Horizontal Constraint (
BCPARAMETER on page 224) Constrains the X
distance of a line or between two points on different objects. Valid objects
include lines and polyline segments.
Vertical Constraint (
BCPARAMETER on page 224) Constrains the Y distance
of a line or between two points on different objects. Valid objects include lines
and polyline segments.
Angular Constraint (
BCPARAMETER on page 224) Constrains the angle
between two lines or polyline segments. It is similar to an angular dimension.
Radial Constraint (BCPARAMETER on page 224) Constrains the radius of a
circle, arc, or polyarc segment.
Diameter Constraint (BCPARAMETER on page 224) Constrains the diameter
of a circle, arc, or polyarc segment.
-BEDIT
Quick Reference
See also:
■ Define Blocks
■ Modify Blocks
■ Modify Dynamic Block Definitions
Summary
If you select a block in a drawing and enter -bedit at the Command prompt,
the selected block is opened in the Block Editor on page 237. If nothing is
selected, the following prompt is displayed:
List of Prompts
The following prompts are displayed
246 | Chapter 3 B Commands