2012

Drawings Tab (Batch Standards Checker)
Allows you to create a list of drawings to audit for standards violations.
Drawings to Check Lists the drawings to audit for standards violations. To
add a drawing, click Add Drawing. To remove a drawing, click Remove
Drawing. An exclamation mark precedes any drawings that the Batch Standards
Checker can't locate. Drawings are audited in the order in which they are
listed. To reorder drawings in the list, click Move Up or Move Down.
Add Standards File Opens a standard file selection dialog box, where you can
locate and select a drawing to audit.
Remove Drawing Removes a drawing from the list displayed in Drawings to
Check.
Move Up Moves the currently selected drawing up one position in the list
displayed in Drawings to Check.
Move Down Moves a standards file down one position in the list displayed
in Standards Used for Checking All Drawings.
Description Provides summary information about the drawing file currently
selected in Drawings to Check.
Check External References of Listed Drawings Determines if external
references (xrefs) are added to the Drawings to Check list. If checked, external
references are added to the list as soon as you start a batch standards audit.
Standards Tab (Batch Standards Checker)
Allows you to specify what standards files are used to verify named objects
during the batch standards audit.
Check Each Drawing Using Its Associated Standards Files Specifies auditing
each drawing using the standards files that are associated with it. If this option
is selected, the remaining options on the tab are not available.
Check All Drawings Using the Following Standards Files Specifies ignoring
the standards files that are associated with individual drawings and using the
ones you select in Standards Used for Checking All Drawings instead.
Standards Used for Checking All Drawings Lists the standards files used to
audit the drawings. To add a standards file, click Add Standards File. To remove
a standards file, click Remove Standards File. If conflicts arise between multiple
standards in this list (for example, if two standards files specify layers of the
same name but with different properties), the standards file that is shown first
Batch Standards Checker Window | 2665