2012

Select Objects Defines the objects that will be included in the action when
modified.
Enter Distance Between Columns When a linear or polar parameter is
selected, specifies the distance between the selected objects when the array
action is modified. To specify the distance, use the mouse pointer.
■ Specify opposite corner.
Enter Distance Between Rows or Specify Unit Cell When an XY parameter
is selected, specifies the distance between the selected objects when the array
action is modified. To specify the distance, use the mouse pointer. To specify
unit cell, enter two values separated by a comma for each of the two points.
Specify Action Location When
BACTIONBARMODE on page 2176 is set to 0,
determines where the action is placed within the Block Editor.
Lookup
The lookup action displays the
Property Lookup Table dialog box on page 255
where you can create a lookup table for the block reference.
Flip
A set of objects is flipped around the reflection line of the flip parameter when
the action is triggered in the block reference.
A flip action can only be associated with a flip parameter.
Specify Selection Set Determines the objects that will be mirrored about the
flip parameter reflection line.
Move
Specifies that the selection set of objects moves when the action is triggered
in a dynamic block reference. A move action can be associated with a point,
linear, polar, or XY parameter.
Select Objects
Select Objects on page 198
Specify Action Location
Specify Action Location on page 198
Specify Parameter Point When a linear or polar parameter is selected,
determines whether the start or end point of the parameter is used to determine
the base point of the action.
When an XY parameter is selected, determines which corner of the parameter
will be associated with the action. The objects selected for the action will be
moved relative to this point.
Multiplier When
BACTIONBARMODE on page 2176 is set to 0 and the action
is triggered, changes the associated parameter value by the specified distance.
198 | Chapter 3 B Commands