2012

The setting is stored as a bitcode using the sum of the following values:
Toolbars and windows not locked0
Docked toolbars locked1
Docked or anchored windows locked2
Floating toolbars locked4
Floating windows locked8
LOFTANG1
Quick Reference
See also:
■ Create a Solid or Surface by Lofting.
RealType:
DrawingSaved in:
90Initial value:
Sets the draft angle through the first cross section in a loft operation.
The 0 direction is measured outward from the curve on the plane of the curve.
The positive direction is measured toward the next cross section. Valid values
include 0 to less than 360.
LOFTANG2
Quick Reference
See also:
■ Create a Solid or Surface by Lofting.
RealType:
DrawingSaved in:
2408 | Chapter 37 L System Variables