2012

Objects Selected
Indicates the number of objects selected.
Destination
Specifies the new name and location of the file and the units of measurement
to be used when the block is inserted.
File Name and Path
Specifies a file name and path where the block or objects will be saved.
[...]
Displays a
standard file selection dialog box.
Insert Units
Specifies the unit value to be used for automatic scaling when the new file is
dragged from DesignCenter
™
or inserted as a block in a drawing that uses
different units. Select Unitless if you do not want to automatically scale the
drawing when you insert it. See INSUNITS.
-WBLOCK
Quick Reference
See also:
■ Create Drawing Files for Use as Blocks
Saves selected objects or converts a block to a specified drawing file.
Summary
If FILEDIA is set to 1, entering -wblock at the Command prompt displays a
standard file selection dialog box in which to specify a name for the new
drawing file. If FILEDIA is set to 0, entering -wblock at the Command prompt
displays a prompt. The new drawing is saved in the file format that is specified
in Save As on the Open and Save tab in the Options dialog box.
After the file is created, the selected objects are deleted from the drawing. You
can use OOPS to restore the objects.
2098 | Chapter 23 W Commands