2012

"shifting" occurs. However, this could result in the view overlapping the
drawing border and title block.
NOTE Orthogonal projected views inherit the parent view justification setting by
default. This is because an alignment constraint exists between parent views and
projected views. In such a case, View Justification is not available for projected
views. However, if the alignment constraint is broken, View Justification becomes
available.
Inventor Reference Parts
Line Style Specifies the line type to use for reference parts (parts that are
placed in the model to add context to it).
If you choose the “As Reference” option, the line type is derived from the
layer Reference Layer. This uses the phantom line type by default.
If you choose the "As Parts" option, the line type is derived from the standard
layers used for all other parts.
If you choose the “Off” option, all reference parts become invisible.
Hidden line calculation Specifies how hidden lines are calculated.
If you choose the “Separate” option, hidden lines for reference lines are
calculated separately from other parts.
If you choose the combined option, hidden lines for reference parts are
calculated together with all other parts.
VIEWGO
Quick Reference
See also:
■ Define and Change Views with ShowMotion
Restores a named view.
Summary
Restores the view you specify to the current viewport. If a layer state, UCS,
live section, visual style, or background setting was saved with the view, the
settings are also restored.
VIEWGO | 2051