2012

Scale
Specifies the absolute scale to use for the base view. Projected views
automatically inherit this scale.
Visibility
Displays the visibility options to set for the base view.
Interference edges Turns visibility of interference edges on or off. When
turned on, the selected view displays both hidden and visible edges that are
otherwise excluded due to an interference condition.
Tangent edges Turns visibility of tangent edges on or off. When turned on,
the selected view displays a line to show the intersection of surfaces meeting
tangentially.
■ Tangent edges foreshortened. Shortens the length of tangential edges to
differentiate them from visible edges. This is available only if Tangent
Edges is selected.
Bend extents Turns visibility of sheet metal bend extent lines on or off. Sheet
metal bend extent lines indicate the location of transition about which a bend
hinges or folds, in a flattened sheet metal view.
This option is available only if the corresponding model has a flattened sheet
metal view defined in it.
Thread features Turns visibility of thread lines on screws and tapped holes,
on or off.
Presentation trails Turns visibility of presentation trails on or off. Presentation
trails are lines in an exploded view (in a presentation file) that show the
direction along which a components are moved into assembled position.
Move
Moves the selected view to another place in a layout.
Exit
Goes back to the previous prompt, or completes the command, depending
on where in the command cycle the option appears.
VIEWEDIT | 2047