2012

Summary
This command is equivalent to the Path option in ARRAY on page 145.
The path can be a line, polyline, 3D polyline, spline, helix, arc, circle, or ellipse.
List of Prompts
The following prompts are displayed.
Select objects: Use an object selection method
Select
path curve on page 156: Use an object selection method
Enter
number of items on page 156 along path or [Orientation on page
157/
Expression on page 157] <Orientation>: Specify the number of items or enter
an option
Specify base point on page 157 or [Key point on page 158] <end of path curve>:
Specify a base point or enter an option
Specify direction to align with path or [2Points/Normal] <current>: Press Enter
or select and option
Specify the distance between items on page 158 along path or [Divide on page
158/
Total on page 158/Expression on page 157] <Divide evenly along path>:
Specify a distance or enter an option
Press Enter to accept or [
ASsociative on page 158/Base point/Items on page
158/
Rows on page 158/Levels on page 158/Align items on page 159/Z direction
on page 159/eXit on page 159]<eXit>: Press Enter or select an option
Path Curve
Specifies the object to use for the path of the array. Select a line, polyline, 3D
polyline, spline, helix, arc, circle, or ellipse.
Number of Items
Specifies the number of items in the array.
156 | Chapter 2 A Commands