2012

Distance (Pan) Up / Down For layout views only, displays the distance the
camera can pan up and down. Applies to Pan + Zoom movement type.
Percentage In / Out For layout views only, displays the percentage the camera
can zoom in and out. Applies to Pan + Zoom movement type.
Current Position For model and layout views, displays the current position
of the camera.
Always Look at Pivot Point For model views only, displays if the view is
locked to the center-of-interest. Applies to Track and Crane movement types.
View
Camera X For current and model views only, displays the X coordinate of the
view’s camera.
Camera Y For current and model views only, displays the Y coordinate of the
view’s camera.
Camera Z For current and model views only, displays the Z coordinate of the
view’s camera.
Target X For current and model views only, displays the X coordinate of the
view's target.
Target Y For current and model views only, displays the Y coordinate of the
view’s target.
Target Z For current and model views only, displays the Z coordinate of the
view’s target.
Roll angle Displays the rotation angle of the view within your viewing plane,
which is a plane parallel to your monitor's screen.
Height Specifies the height of the view.
Width Specifies the width of the view.
Perspective For current and model views, specifies whether perspective view
is on.
Lens Length (mm) For all views except layouts, specifies the lens length (in
millimeters). Changing this value changes the Field of View setting accordingly.
Field of View For all views except layouts, specifies the horizontal field of
view (in current angle units). Changing this value changes the Lens Length
setting accordingly.
View Manager | 2017