2012

Table Of Contents

TRACE

Quick Reference

See also:

■ Draw Linear Objects

Creates solid lines.

Obsolete

The TRACE command and TRACEWID system variable have been removed

from the product.

Summary

The endpoints of a trace are on the center line and are always cut square.

TRACE automatically calculates the correct bevels for connection to adjacent

segments. Each segment is drawn after you either specify the next segment

or press Enter. Because of the way bevels are handled, TRACE has no undo

option.

Traces are solid filled when Fill mode is on. When Fill mode is off, only the

outline of a trace is displayed.

List of Prompts

The following prompts are displayed.

Specify trace width <current>: Specify a distance or press Enter

Specify start point: Specify a point (1)

Specify next point: Specify a point (2)

Specify next point: Specify a point (3) or press Enter to end the command

TRANSPARENCY

Quick Reference