2012

Insert a Block in a Table Cell Dialog Box
Quick Reference
See also:
■ Add Text and Blocks to Tables
Specifies options for inserting a block in a table cell.
List of Options
The following options are displayed.
Name Specifies the block reference to insert.
Browse Displays the Select Drawing File dialog box. Select the drawing file to
insert as a block reference.
Path Displays the location of the drawing file selected in the Select Drawing
File dialog box.
Scale
Specifies the scale for the block reference. Enter a value or select AutoFit to
scale the block to fit in the selected cell.
AutoFit Controls if the block reference should be scaled to fit in the select
table cell, or if the height and width of the table cell should be adjusted to fit
the block reference being inserted.
Rotation Angle
Specifies a rotation angle for the block.
Overall Cell Alignment
Specifies alignment for the block in the table cell. The block is middle-, top-,
or bottom-aligned with respect to the top and bottom borders of the cell. The
block is center-, left-, or right-aligned with respect to the left and right borders
of the cell.
1938 | Chapter 20 T Commands