2012

After all interaction concerning tablet menus is complete, the following prompt
is displayed:
Do you want to respecify the screen pointing area? [Yes/No] <N>: Enter y or n
or press Enter
If you enter y, the following prompts are displayed:
Digitize lower-left corner of the pointing area: Digitize a point
Digitize upper-right corner of the pointing area: Digitize a point
A small portion of the tablet's surface is designated as the fixed screen pointing
area.
Do you want to specify the Floating Screen Pointing area? [Yes/No] <N>: Enter
y or n or press Enter
If you responded y to the previous prompt, respond to the following prompt:
Do you want the Floating Screen Area to be the same size as the Fixed Screen
Pointing Area? [Yes/No] <Y>: Enter y or n or press Enter
If you responded n to the previous prompt, respond to the following prompts:
Digitize lower-left corner of the Floating Screen pointing area: Digitize a point
Digitize upper-right corner of the Floating Screen pointing area: Digitize a point
Respond to the following prompt:
Would you also like to specify a button to toggle the Floating Screen Area?
[Yes/No] <N>: Enter y or n or press Enter
If you responded y to the previous prompt, respond to the following prompt:
Press any non-pick button on the digitizer puck that you wish to designate as
the toggle for the Floating Screen Area
TABSURF
Quick Reference
See also:
■ Construct Meshes from Other Objects
Creates a mesh from a line or curve that is swept along a straight path.
1916 | Chapter 20 T Commands