2012

Table Of Contents

Extend Controls whether the cutting surface is trimmed to meet the edge of

the trimmed surface.

Projection Direction The cutting geometry is projected onto the surface.

Controls the projection angle as follows:

Automatic

■ When trimming a surface or region in plan, parallel view

(for example, the default Top, Front, and Right view), the

cutting geometry is projected onto the surface in the view

direction.

■ When trimming a surface or region with a planar curve in

an angled parallel or perspective view, the cutting geo-

metry is projected onto the surface in a direction perpen-

dicular to the curve plane.

■ When trimming a surface or region with a 3D curve in an

angled, parallel or perspective view (for example, the de-

fault perspective view), the cutting geometry is projected

onto the surface in a direction parallel to the Z direction

of the current UCS.

Projects the geometry based on the current view.View

Projects the geometry in the +Z and -Z axis of the current UCS.UCS

The surface will only be trimmed if the cutting curve lies on

the surface.

None

SURFUNTRIM

Quick Reference