2012

Summary
When you blend two surfaces together, you specify surface continuity and
bulge magnitude.
Set SURFACEASSOCIATIVITY on page 2558 to 1 to create a relationship between
the blend surface and the originating curves.
List of Prompts
The following prompts are displayed.
Select Surface Edge
Selects an edge subobject or a surface or region (not the surface itself) as the
first and second edges.
Chain
Selects contiguous, connected, edges.
Continuity
Measures how smoothly surfaces flow into each other. The default is G0. Select
a value or use the grip to change the continuity.
Bulge Magnitude
Sets the roundness of the blend surface edge where it meets the originating
surface. The default is 0.5. Valid values are between 0 and 1.
SURFBLEND | 1867