2012

Access Methods
Menu: Tools ➤ Drafting Settings
Toolbar: Status bar ➤ Snap
Command entry: snap or ‘snap for transparent use
List of Prompts
The following prompts are displayed.
Specify snap spacing on page 1783 or [ON on page 1783/OFF on page 1783/Aspect
on page 1783/Style on page 1783/Type on page 1784] <current>: Specify a distance,
enter an option, or press Enter
Snap Spacing
Activates Snap mode with the value you specify.
On
Activates Snap mode using the current settings of the snap grid.
Off
Turns off Snap mode but retains the current settings.
Aspect
Specifies different spacing in the X and Y directions.
Style
Specifies the format of the snap grid, which is Standard or Isometric.
Standard
Sets a rectangular snap grid that is parallel to the XY plane of the current UCS.
X and Y spacing may differ.
Spacing Specifies the overall spacing of the snap grid.
SNAP | 1783