2012

Path
Links a camera to a motion path in the drawing.
Pick Point/Select Path
Selects either the point where a camera is located or the path along which a
camera travels, depending on whether Point or Path was selected.
Point/Path List
Displays a list of named points or paths to which you can link a camera. To
create a path, you can link a camera to a line, arc, elliptical arc, circle, polyline,
3D polyline, or spline.
NOTE When you create a motion path, a camera is automatically created. If you
delete an object that you specified as a motion path, the named motion path is
also deleted.
Target
Link Target To Links a target to a point or a path.
If the camera is linked to a point, the target must be linked to a path. If the
camera is linked to a path, you can link the target to either a point or a path.
Point
If the camera is linked to a path, links the target to a static point in the
drawing.
Path
Links the target to a motion path in the drawing.
Pick Point/Select Path
Selects either the point or a path for the target, depending on whether Point
or Path was selected.
Point/Path List
Displays a list of named points or paths to which you can link the target. To
create a path, you can link a target to a line, arc, elliptical arc, circle, polyline,
3D polyline, or spline.
Animation Settings
Controls the output of the animation file.
Frame Rate (FPS)
The speed at which the animation will run, measured in frames per second.
Specify a value from 1 to 60. The default value is 30.
Motion Path Animation Dialog Box | 117